Custom Barrier

This section defines custom barriers using user-defined sections for the left side of the deck.

Navigation: Superstructure Attachments > Custom Barrier

For detailed parameter explanations, see the Custom Barrier Reference.

Steps

Step 1: Navigate to Custom Barrier

Navigate to Superstructure Attachments > Custom Barrier in the tree view.

Navigation

Step 2: Select Deck

Click the three-dots icon on the Deck cell and select Span1.

Step 3: Assign Section

Select the Exist_Barrier_sw section that was defined in the Properties section.

Section Assignment

Step 4: Set Transverse Location

Enter Start Transverse Location and End Transverse Location as -160.43 (for left side placement).

Transverse Location

Step 5: Name the Barrier

Enter the name as CustBar1.

Step 6: Create Barriers for All Spans

Repeat the previous steps to create custom barriers for Span2 and Span3.

All Custom Barriers

Quick Tip: Transverse Offset Direction

Offset values use the Profile Grade Line (PGL) as the reference point.

Offset Reference

Verification

After completing these steps, your custom barrier configuration should match the views shown below.

Completed Custom Barrier View 1

Completed Custom Barrier View 2