Rebars

This section defines reinforcement bar profiles used for deck and substructure components.

Navigation: Properties > Rebars

For detailed parameter explanations, see the Rebars Reference.

Steps

Step 1: Navigate to Rebars

Navigate to Properties > Rebars in the tree view.

Step 2: Import Rebar Profiles

Click the three-dots icon on the first cell under Name and select Import Rebar Profile.

Import Rebar

Step 3: Select Rebar Sizes

Import the following rebars from the OpenBrIM Library:

Rebar Path	Rebar Name
OpenBrIM Bridge Objects > ASTM Rebar Sizes (Imperial) > ASTM615	ASTMA615No5
OpenBrIM Bridge Objects > ASTM Rebar Sizes (Imperial) > ASTM615	ASTMA615No6
OpenBrIM Bridge Objects > ASTM Rebar Sizes (Imperial) > ASTM615	ASTMA615No8
OpenBrIM Bridge Objects > ASTM Rebar Sizes (Imperial) > ASTM615	ASTMA615No9

Rebar Selection

Quick Tip: Rebar Usage

• No5 and No6 rebars are typically used for deck reinforcement

• No8 and No9 rebars are typically used for pier cap and column reinforcement

Verification

After completing these steps, the rebar definitions should match the view shown below.

Completed Rebars

To view the entire procedure explained on this page, please watch the recorded video below.

Properties-Rebars SIG EX1