Cross-Section

This section defines the deck cross-section geometry including width, thickness, and overhang dimensions.

Navigation: Superstructure > Deck > Cross-Section

For detailed parameter explanations, see the Cross-Section Reference.

Steps

Step 1: Set Deck Width

Enter the following deck width parameters:

Parameter	Value
PGL to Left Edge	20.25 ft
PGL to Right Edge	20.25 ft

PGL to Left Edge

PGL to Right Edge

Step 2: Set Deck Thickness

Enter the Mid Thickness as 9 in.

Mid Thickness

Step 3: Set Overhang Thickness

Keep the Left Overhang Thickness and Right Overhang Thickness as default.

Overhang Thickness

Verification

The completed deck cross-section is shown below.

Completed Cross-Section

To view the entire procedure explained on this page, please watch the recorded video below.

Deck Cross Section