> For the complete documentation index, see [llms.txt](https://docs.openbrim.org/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.openbrim.org/templates/concrete-box-girder-bridge-workflow/reports-cbg/static-pushover-graph-cbg.md).

# Static Pushover Graph \[CBG]

## Static Pushover Graph

The Static Pushover Graph report compares the displacement capacity of the substructure from a pushover analysis with the displacement demand of a Response Spectrum Analysis (RSA). Once the cases are selected, OpenBrIM takes a control node from the pushover load: the top node of the loaded pier column, or the center node of the loaded pier cap. It plots the pushover curve (base shear versus control node displacement, in the pushover direction), takes the displacement capacity at the first step where any hinge exceeds its capacity (the last step when none does), and compares it with the RSA displacement of the same node. An example report output is displayed below.

![Static Pushover Graph example report output, part 1](https://openbrim.atlassian.net/wiki/download/attachments/3424387074/image-20251117-121136.png?api=v2)

![Static Pushover Graph example report output, part 2](https://openbrim.atlassian.net/wiki/download/attachments/3424387074/image-20251117-121156.png?api=v2)

### General

**Pushover Case:** Select the pushover analysis case to evaluate. This case holds the nonlinear static analysis results in which lateral loads are applied incrementally to push the structure to its capacity, and the pushover curve is generated from it. The user must provide a value.

**RSA Case:** Select the Eigenvalue and RSA Case to compare with the pushover results. The RSA case provides the elastic displacement demand from seismic loading; overlaying it on the pushover curve shows whether the structure has enough displacement capacity to meet the seismic demand. A value is required while Run for Pushover Graph Only is set to No; when it is set to Yes the input is shown as N/A and is not required.

### Advanced

**Run for Pushover Graph Only (Ignore RSA Case) \[No/Yes]:** Controls whether the RSA comparison is part of the report.

* **No** (default): The pushover curve is generated and the RSA displacement demand is overlaid on it for the demand-capacity comparison.
* **Yes:** Only the pushover curve is generated and the RSA case is ignored. Use this when an RSA case has not been defined yet or when a standalone capacity curve is all that is needed.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://docs.openbrim.org/templates/concrete-box-girder-bridge-workflow/reports-cbg/static-pushover-graph-cbg.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
