Bridge Cross Section CADD [CUG]

General

Bridge: Since OpenBrIM supports the modeling of multiple bridges, this parameter should specify the bridge for which the Bridge Cross Section will be generated.

Station of Cross-Section: Specifies the location along the bridge alignment where the cross-section will be taken for the CAD drawing.

General Visual Setting

Show Dist. from Alignment [Both Sides/Right Side/Left Side/NO]: Controls whether distances from alignment are displayed on the drawing and from which side [Both Sides=0/Right Side=1/Left Side=2/NO=3].

Dimension Line Font Size (Only .dgn): Sets the font size for dimension lines in .dgn format drawings.

Annotation Font Size: Specifies the size of annotation text on the drawing.

Annotation Arrow Size: Controls the size of arrows used in annotations.

Dist. from Alignment Dim. Line Vert. Offset from Deck Edge: Sets the vertical offset distance for dimension lines showing distances from alignment, measured from the deck edge.

Out-to-Out Dim. Line Vert. Offset from Deck Edge: Sets the vertical offset distance for out-to-out dimension lines, measured from the deck edge.

Overhang Thickness Dim. Line Horz. Offset from Deck Edge: Sets the horizontal offset distance for overhang thickness dimension lines, measured from the deck edge.

Deck Thickness Dim. Line Horz. Location from Left Deck Edge: Specifies the horizontal location for deck thickness dimension lines, measured from the left deck edge.

Deck Thickness Dim. Line Vert. Offset from Point: Sets the vertical offset distance for deck thickness dimension lines from the reference point.

Deck Thickness Dim. Line Horz. Offset from Point: Sets the horizontal offset distance for deck thickness dimension lines from the reference point.

Haunch Thickness Dim. Line Horz. Location from Left Deck Edge: Specifies the horizontal location for haunch thickness dimension lines, measured from the left deck edge.

Haunch Thickness Dim. Line Vert. Offset from Point: Sets the vertical offset distance for haunch thickness dimension lines from the reference point.

Haunch Thickness Dim. Line Horz. Offset from Point: Sets the horizontal offset distance for haunch thickness dimension lines from the reference point.

Haunch Width Dim. Line Vert. Offset from Haunch: Sets the vertical offset distance for haunch width dimension lines, measured from the haunch.

Curb-to-Curb Dim. Line Vert. Offset from Deck Edge: Sets the vertical offset distance for curb-to-curb dimension lines, measured from the deck edge.

Barrier Dim. Line Horz. Offset: Sets the horizontal offset distance for barrier dimension lines.

Roadway Dim. Line Vert. Offset from Deck Edge: Sets the vertical offset distance for roadway dimension lines, measured from the deck edge.

Lane Dim. Line Vert. Offset from Deck Edge: Sets the vertical offset distance for lane dimension lines, measured from the deck edge.

Cross-Slope Horizontal Offset: Sets the horizontal offset distance for cross-slope dimension lines.

Girder Dim. Line Horz. Offset from Bottom of Girder: Sets the horizontal offset distance for girder dimension lines, measured from the bottom of the girder.