Line Load (on wall edge) [RW]

Applies a distributed line load along one of the defining edges of a wall segment.

General

Wall Segment: The wall segment the load is applied to.

Stage: Construction stage at which the load is applied.

Loaded Edge [Top of Wall=0/Top of Footing - Toe=1/Top of Footing - Heel=2/Stem-Footing Joint=3]: Selects which edge of the segment carries the line load (default: Top of Wall=0).

Variation [Uniform=0/Linear along edge=1]: Whether the load is constant along the edge or varies linearly between the start and end stations (default: Uniform=0).

Magnitude (at start station): Line load intensity at the start station of the edge (default: 0).

Magnitude (at end station). Used only when Variation=Linear.: Line load intensity at the end station. Applicable only when Variation is Linear (default: 0).

Direction [Gravity (-Z global)=0/Transverse (toward toe)=1/Longitudinal (along alignment)=2]: Direction the line load acts in (default: Gravity (-Z global)=0).