# Pushover Load \[SPIG]

## General

**Point:** Loading - Load Geometry Definitions - Point objects can be used for defining this parameter. The point will be utilized for location definition for the pushover point load.

**Pushover Case:** Specify a previously defined pushover case to be used for analysis.

**Fx:** Initial force acting along the X-axis, which will be increased by the related factors defined in the Pushover Load - Pushover Case object.

**Fy:** Initial force acting along the Y-axis, which can also be increased by the related factors defined in the Pushover Load - Pushover Case object.

**Fz (Gravity):** Initial force acting along the Z-axis (typically representing gravity), which will be increased by the related factors defined in the Pushover Load - Pushover Case object.

**Mx:** Initial moment about the X-axis, which will be increased by the related factors defined in the Pushover Load - Pushover Case object.

**My:** Initial moment about the Y-axis, which will be increased by the related factors defined in the Pushover Load - Pushover Case object.

**Mz :** Initial moment about the Z-axis, which will be increased by the related factors defined in the Pushover Load - Pushover Case object.

**Element \[Girder Top Flange/Girder Bottom Flange/Deck/Foundation/Pier Cap and Bents]:** OpenBrIM assigns the defined point loads to the selected element nodes based on their distance. If there is no node at the exact location, it is assigned to the nearest nodes based on distance.


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://docs.openbrim.org/templates/spliced-i-girder-bridge-workflow/loading-spig/loads-spig/pushover-load-spig/pushover-load-spig.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.