# Pile Capacity Check \[STG]

## General

**Template:** The code check template is utilized to extract global parameters, results from finite element analysis, and limit states employed in the design process.

**Pile Cap:** Pile cap, pier or bent for code check. The detailed report will include information about all piles located under the pile cap.

**PDF Name (Export):** This parameter allows the name of the code check document to be modified when saving it as a PDF. When renaming the file, special attention must be given to the text characters on the [linked](https://docs.openbrim.org/faq/general/faq-illegal-chars) page, as certain characters may interfere with parametric equations and lead to unexpected results.

**Pile Cap Name:** Name identifier for the pile cap used in the analysis and reporting.

**Factored Result Name:** Name identifier for the factored results dataset used in the code check calculations.

**Pile Cap Type:** Specifies the type of pile cap structure \[Footing/End Bent].

**Pile Name List:** List of all pile names that are part of the pile cap system for analysis.

**Pile Capacity List:** Array of compression capacities for each pile in the system.

**Defined Strength Limit State List:** List of strength limit states defined for the design code being used.

**Defined Service Limit State List:** List of service limit states defined for the design code being used.

**Defined All Limit State List:** Comprehensive list of all limit states including strength, service, and other applicable limit states.

## Footing CAD View Parameters

**Footing Polygon 1:** Coordinates defining the outline of the footing polygon for visualization.

**Footing Longitudinal Offset 1:** Longitudinal offset distance for footing display positioning.

**Footing Transverse Offset 1:** Transverse offset distance for footing display positioning.

**Rotation 1:** Rotation angle for the footing CAD display.

**Center Coordinate 1:** Center point coordinates for the footing geometry.

**Minimum X 1:** Minimum X-coordinate boundary of the footing.

**Maximum X 1:** Maximum X-coordinate boundary of the footing.

**Piles 1:** Collection of piles under the footing for display purposes.

**Offset Point 1:** Reference offset point for footing positioning.

**Pile Coordinates Rotated 1:** Rotated coordinates of piles relative to footing center.

**Pile Global Coordinates:** Global coordinates of all piles in the system.

**Pile Global Section References:** Section references for piles at global coordinates.

**Pile Global Names:** Names assigned to piles at global coordinates.

## End Bent CAD View Parameters

**Minimum X:** Minimum X-coordinate boundary of the end bent structure.

**Maximum X:** Maximum X-coordinate boundary of the end bent structure.

**Section Width:** Width dimension of the end bent section for CAD display.

**Rotation:** Rotation angle for the end bent CAD display.

**Center Coordinate:** Center point coordinates for the end bent geometry.

**Piles:** Collection of piles under the end bent for display purposes.

**Pile Global Coordinates EB:** Global coordinates of all piles in the end bent system.

**Pile Global Section References EB:** Section references for piles at global coordinates in end bent.

**Pile Global Names EB:** Names assigned to piles at global coordinates in end bent.