> For the complete documentation index, see [llms.txt](https://docs.openbrim.org/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.openbrim.org/templates/truss-bridge-workflow/templates-for-code-check-and-load-rating-tb/gusset-plate-load-rating-lrfr-tb.md).

# Gusset Plate Load Rating (LRFR) \[TB]

## Gusset Plate Load Rating (LRFR)

The Gusset Plate Load Rating (LRFR) template collects the inputs shared by every gusset plate load rating of the bridge: the Strength and Service II load rating combinations, the condition and system factors, and the plate and fastener settings, per AASHTO MBE 6A.6.12 and AASHTO LRFD 6.14.2.8. Each Gusset Plate Load Rating (LRFR) object under the Load Rating section points at one template to inherit these values, so they do not have to be repeated at every plate.

### General

**Strength (Load Rating Combination):** The Load Rating Combination Table (LRFR) used for the Strength limit state rating. It maps the dead load cases and the live load stages (design, legal, emergency and permit vehicles) and provides their load factors. The user must provide a value.

**Service II (Load Rating Combination):** The Load Rating Combination Table (LRFR) used for the Service II rating, which checks bolt slip. Leave it empty when the Service II rating is not needed.

**Condition Factor:** The condition factor φc of MBE 6A.4.2.3, which reflects the deterioration of the member. The default is 1.0.

**System Factor:** The system factor φs of MBE 6A.4.2.4, which reflects the redundancy of the load path. The default is 1.0.

### Plate

**Bolt Holes \[Punched/Drilled]:** How the fastener holes were made. The default is Drilled.

**Uniform Block Shear Tension \[No/Yes]:** Whether the tension stress on the block shear path is uniform. Select Yes when the tensile stress is uniform (reduction factor of 1.0) and No when it is not (0.5), per AASHTO LRFD 6.13.4. The default is No.

### Fasteners

**Fastener Type \[Bolt/Rivet]:** Whether the connection is bolted or riveted. The default is Bolt.

**Rivet \[Pre1936/Post1936/A502Gr1/A502Gr2]:** The rivet grade, which sets the rivet shear strength: rivets driven before 1936 or of unknown origin, rivets driven after 1936 of unknown grade, ASTM A502 Grade 1, or ASTM A502 Grade 2. Available when Fastener Type is Rivet.

**Bolt Grade \[A325/F1852/A490/F2280]:** The high-strength bolt grade. The default is A325.

**Bolt Threads in Shear Plane \[Excluded/Included]:** Whether the bolt threads are excluded from or included in the shear planes, which sets the bolt shear resistance. The default is Excluded.

**Slip Surface \[Class A/Class B/Class C/Class D]:** The surface condition class of the faying surfaces, which sets the slip coefficient for the Service II slip rating. The default is Class A.

**Hole Type \[Standard/Oversize/Short Slotted/Long Slotted Perp./Long Slotted Par.]:** The hole type, which sets the hole size factor for the slip resistance. The default is Standard.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://docs.openbrim.org/templates/truss-bridge-workflow/templates-for-code-check-and-load-rating-tb/gusset-plate-load-rating-lrfr-tb.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
